Skip to main content

Research Idea from statistics and hydrology

New Research Ideas : Comparing the Probability Distribution Function of Runoff in Different Locations of Small Scale Urban Rivers

Popular posts from this blog

How to calculate Water Quality Index considering the source type,intended use and climate ?

This WQI's primary innovation is that it calculates the WQI based on the type of source from which water is collected, the WQI's intended use, and the local climate at the time the samples were retrieved. The source or location from where the sample is collected has an impact on the quality of water which the index must incorporate at the time of calculation. The purpose for which the water quality index is calculated changes the weightage of the importance of the different quality parameters. For example, if WQI is calculated for knowing how drinkable the sample is then the weightage of coliform will increase compared to other parameters as the presence of coliform in the drinking water can not be permitted. The climate of the area from where the water is collected is another criterion to consider at the time of calculating the WQI. Based on the climate also the weightage of water quality parameters will vary. There will be a difference in the weight of importance if the sampl...

Seven Most Tenable Application of Artificial Intelligence on Water Resource Management Problems

AI or Artificial Intelligence is a pioneering technique that has enabled the creation of intelligent machines. or smart machines which have the power to self adapt based on the situation presented to them. It requires situations whose response is known and based on this training data set it learns the problems which it has to solve when it is ready. Due to the alarming success with AI in robotics, electronics, etc fields the same technique is now used to solve the problems of water resource management. This ppt shows the seven most notable use of AI in water resources-based problems where satisfactory improvement has encouraged the further application of the technique. View the Presentation Dr.Mrinmoy Majumder, My ResearchGate Id : Mrinmoy_Majumder Home Page: http://www.mrinmoymajumder.com   Author of: Lecture Notes on MCDM Indian Link  ; Global Link :

Five open source free hydrologic models that you can use to model runoff of micro to macro watersheds

The principal objective of hydrologic models is to forecast the runoff of a surface water body, especially dendritic systems like rivers, streams, etc. The inputs to these models are generally Rainfall/Precipitation, Soil Characteristics, and other Climatic parameters like evapotranspiration, humidity, etc. LULC and geo-morphology are also used as the required input parameters of the hydrologic models. Both input and output of these models are temporally as well as spatially variable. Now the resolution varies with different models. Some models consider all the sub-basins to be a single watershed and determine the output based on the characteristics of this single watershed(lumped).In contrast, some other models will consider the {impact|effect} of each of the sub-basins on the central outflow of the watershed(distributed).In a few models, the entire watershed is divided into grids or units of uniform dimension. However, the accuracy is highest for the models, which considers the {impa...